Positioning The Flow Baffle; Positioning The Seat - Toro Z Master 3000 SERIES Operator's Manual

Positioning the Flow Baffle

The following figures are only recommendations for use.
Adjustments will vary by grass type, moisture content, and
height of grass.
Note: If the engine power draws down and the mower
ground speed is the same, open up the baffle.
Position A
This is the full rear position. The suggested use for this
position is as follows:
•
Use for short, light grass mowing conditions.
•
Use in dry conditions.
•
Use for smaller grass clippings.
•
Use to propel grass clippings farther away from the
mower.
Figure 32
Position B
Use this position when bagging. Always align it with the
blower opening.
Figure 33
Position C
This is the full open position. The suggested use for this
position is as follows:
•
Use in tall, dense grass-mowing conditions.
•
Use in wet conditions.
•
Use to lower the engine power consumption.
•
Use to allow increased ground speed in heavy conditions.
•
This position offers benefits similar to those of the Toro
SFS mower.

Positioning the Seat

The seat can move forward and backward. Position the seat
where you have the best control of the machine and are most
comfortable.
To adjust, move the lever sideways to unlock seat (Figure 35).
G008962
25
Figure 34
Figure 35