Toro Z Master 3000 SERIES Operator's Manual page 59

Figure 96
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7. Remove and retain the hardware on both sides of the
deck as shown in Figure 97.
Figure 97
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the rear deck lift attachment shoulder bolt and nut.
4. Remove the front deck lift attachment shoulder bolt and nut.
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
8. Raise the deck struts and secure them in the up
position. Slide the deck out to the right side of the
machine.
59