Driving Forward Or Backward - Toro Z Master 3000 SERIES Operator's Manual

5. Sitting on the seat, disengage the parking brake, move
the blade control switch (PTO) to off and move the
motion control levers to neutral lock position. Try
starting the engine; the engine should not crank.

Driving Forward or Backward

The throttle control regulates the engine speed as measured
in rpm (revolutions per minute). Place the throttle control in
the fast position for best performance. Always operate in the
full throttle position when mowing.
CAUTION
Machine can spin very rapidly. Operator may lose
control of machine and cause personal injury or
damage to machine.
• Use caution when making turns.
• Slow the machine down before making sharp
turns.
Using the Motion Control Levers
Figure 23
1. Motion control
lever-neutral lock position
2. Center, unlocked position
3. Forward
4. Backward
5. Front of machine
Driving Forward
Note: The engine will kill if the traction control levers are
moved with the parking brake engaged.
To stop, pull the motion control levers to the neutral position.
1. Release the parking brake; refer to Releasing the
Parking Brake in Operation.
2. Move the levers to the center, unlocked position.
3. To go forward, slowly push the motion control levers
forward (Figure 24).
Driving Backward
1. Move the levers to the center, unlocked position.
2. To go backward, slowly pull the motion control levers
rearward (Figure 25).
21
Figure 24
G008952