Product Specifications - jobmate 54-2877-4 Owner's Manual

DRILL
Motor speeds:
Battery:
Clutch positions:
Keyless chuck:
Weight:
BATTERY & CHARGER
Battery Voltage ...............
Charger .........................
Charger Input ..................
Charger Output ...............
Replacement Battery ........
!
WARNING:
charger, use proper circuit protection.
The battery charger is wired at the factory for 110–120 V operation. It must be
connected to a 110–120 V, 15 A time delayed fuse or circuit breaker. To avoid shock or
fire, replace power cord immediately if it is worn, cut or damaged in any way.
SPECIFICATIONS:
To avoid electrical hazards, fire hazards or damage to the battery
0–550 RPM (no load)
14.4 V
17 including drill mode
3
"
/
8
6 lb. 10 oz. (3 kg)
14.4 V
3–5 Hour, Class 2
120 V AC, 60 Hz
18 V DC, 450 mA
54-2779-8
3