Network Deployment - Vivotek nd8401 User Manual

4

Network Deployment

1. Connect network cameras to the NVR's LAN ports.
2. If you want to access NVR over the Internet, connect the NVR to the Internet via the
WAN port. A web console can be established from a remote PC by keying
IP>:3454
the TCP port will be necessary.
3. Flip the power switch (at the rear of chassis) to the ON position, and push the power but-
ton to run the NVR.
Switch
LAN
Default Fixed IP:
192.168.1.10
0
1
NOTE:
If you have cameras connected via the WAN port, make sure the WAN port
acquires an IP address from a DHCP server on router or AP. If not, the cameras
detected through the WAN port will use the default IPs, e.g., 169.254.xx.xx, and the
LiveClient software will not be able to detect their presence.
Router
WAN
Default: DHCP
EN - 6
Internet
Router / Wireless AP
http://<public
Clients
Router