Description Of The Tumble Dryer; Front Side; Rear Side; Control Panel - Indesit IDV 75 Instruction Manual

Hide thumbs Also See for IDV 75:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Description
of the tumble dryer

Front side

Control panel

Serial number
and model
number
Filter
Control panel
Drying time selector knob
This is used to set the drying time: turn the knob in a clockwise direction until the indicator is set to the desired drying time (see
Drying settings). Do not attempt to turn the knob anticlockwise.
High Heat button
It can be used to customise the selected programme in accordance with your own requirements.
START button
Press the button to begin drying.

How to carry out a drying cycle

Starting a drying programme

1. Plug the dryer into the power supply socket.
2. Select a suitable drying programme for the type of laundry (see Laundry).
3. Open the door, ensure that the filter is clean and securely placed.
4. Load the machine, making sure that no piece of laundry gets between the door and the door seal. Close the door.
5. Turn the "Drying time selector" knob until the indicator is pointing towards the most suitable drying time for the type of fabric in
that load. Use the table to check the relationship between fabric type and load capacity (see Drying settings), and make sure you
are familiar with the instructions provided for each type of fabric (see Laundry). Do not attempt to turn the knob anticlockwise.
6. If necessary, set the temperature using the HIGH HEAT button.
7. Press the START button to start the drying cycle.
Laundry can be checked while the drying programme runs and any garments already dry can be removed, while drying continues
for the remaining items. After closing the door, press the START button to resume machine operation.
8. The final COOL TUMBLE phase (i.e. the fabrics are cooled) activates during the last few minutes of the drying programme; always
allow this phase to terminate.
9. Open the door, remove the laundry then clean the filter and replace it.
10. Disconnect the dryer from the power supply.
Drum

Rear side

Rating Plate
Caution, high
temperature
Start
High Heat
button
button
Drying time selector
knob
Air inlet
Connection for
ventilation hose
EN
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Idc 75

Table of Contents