External Earpiece And Microphone; Vibra; Av Connector - Nokia RM-609 Service Manual

Hide thumbs Also See for RM-609:
Table of Contents

Advertisement

RM-609
System Module
Figure 61 Internal microphones diagram

External earpiece and microphone

The AV headset earpiece is connected to TPA6140 audio amplifier which is used for high quality audio output
and to guarantee long playback time for accessory use. TPA6140 is connected to Gazoo/Pearl XEarL, XEarLC,
XEarR, XEarRC lines for audio and is controlled via I2C_2 bus by RAPU.
The AV headset microphone line is connected to EM ASIC Gazoo/Pearl Mic2 line via AV switch N2001.

Vibra

Vibra is connected to VibraN and VibraP lines of EM ASIC Gazoo/Pearl.
Figure 62 Vibra diagram

AV connector

The AV connector handles both audio and video signals output. It has audio left and right signals separately
(pins 4 and 5) and the microphone signal wired to pin 3.
Page 6 – 30
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2011 Nokia. All rights reserved.

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents