Dryer Description; To Open The Door; The Features; Control Panel - Hotpoint Aquarius CTD00 Instructions For Installation And Use Manual

Dryer Description

To open the door

GB
Press and release the front
Condenser Unit
(cover open)

Control panel

Drying Guide
The START button begins drying a selected
programme (see Start and Programmes).
The HEAT button selects drying temperature (see
Start and Programmes).
OUT: HIGH heat. IN: LOW heat.
The Drying Guide allows you to consult a user
friendly table of fabric types and load capacities.
6
panel in position shoiwn
HEAT
Button

The features

Condenser cover
Condenser cover handle
(Pull to open)
Empty Water
Light
The Empty Water indicator light signals that the
water container is full and must be emptied. The light
will take a few seconds to go out after replacing the
empty water container, the dryer must be running for
this to happen.
Note: If the water container fills, this light illuminates,
the heat is turned off and your laundry will not dry.
The TIMER knob sets a drying time.
Rotate it clockwise, never counter-clockwise, until
the indicator is pointing to the drying time you want
to select (see Start and Programmes).
Rating plate
Water container
Model &
Serial
numbers
Air intake
grille
Filter
Indicator
START
Button
TIMER
Knob