Service - Hotpoint Aquarius CTD00 Instructions For Installation And Use Manual

Hide thumbs Also See for Aquarius CTD00:
Table of Contents

Advertisement

Service

Before calling the Service Centre:
Use the troubleshooting guide to see if you can
solve the problem yourself (see Troubleshooting).
If not, turn off the dryer and call the Service
Centre closest to you.
What to tell the Service Centre:
name, address and post code.
telephone number.
the type of problem.
the date of purchase.
the appliance model (Mod.).
the serial number (S/N).
This information can be found on the data label inside
the door of the machine.
Plumbing your Dryer (Optional)
If your dryer is installed next to a drain, the water can be
plumbed into this drain. This does away with the need to
empty the water container.
If the dryer is stacked onto or installed next to a washing
machine it can share the same drain.
The height of the drain must be less than 3' (1m) from
the bottom of the dryer.
This appliance conforms to the following EC Directives:
- 2006/95/EC (Low Voltage Equipment)
- 89/336/EEC, 92/31/EEC and 93/68/EEC (Electromagnetic Compatibility)
Spare Parts
This dryer is a complex machine. Repairing it yourself
or having a non-authorised person try to repair it could
cause harm to one or more persons, could damage
the machine and could invalidate the spare parts
warranty.
Call an authorised technician if you experience problems
while using the machine.
The spare parts have been designed exclusively for
this appliance and not for other uses.
Remove the existing clip and hose,
from the position shown (see
diagram).
Remove clip and hose
from here...
Fit a suitable length of hose to
location shown and refit the clip
(see diagram).
! Make sure that the hose is not squashed or kinked when
the dryer is in its final location.
GB
...fit new hose and refit
clip here.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents