Refrigerator Doors - Maytag MRT711BZDH User Instructions

Depending on the width of your doorway, you may need to
remove the doors to move the refrigerator into your home. Also,
the door hinges are factory-installed on the right-hand side. If you
want the door to open from the other direction, you must reverse
the door swing.
IMPORTANT:
Before you begin, turn the refrigerator control OFF, unplug
refrigerator or disconnect power. Remove food and any
adjustable door or utility bins from doors.
If you choose to reverse the door swing, a Reversibility Kit,
which includes a new brand badge and hole plugs, is
available.
Tools Needed: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips
screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2"
putty knife.
Remove Doors and Hinges
⁵⁄₁₆
" Hex-Head Hinge Screw
1. Unplug refrigerator or disconnect power.
2. Using a hex-head socket wrench, remove the three ⁵⁄₁₆"
hex-head hinge screws from the top hinge and lift up to
remove the hinge.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
D
⁵⁄₁₆
A. " Hex-head hinge screws
B. Top hinge
3. Lift the freezer door off of the center hinge and set it aside.
4. Remove the washer from the top of the center hinge pin.
A. Washer
6

Refrigerator Doors

5. Using a hex-head socket wrench, remove the three screws
6. Lift the refrigerator door off of the bottom hinge and set it
7. Open refrigerator door and remove base grille from the bottom
A
8. Using a hex-head socket wrench, remove the two ⁵⁄₁₆"
B
C
C. Hinge pin
D. Spacer
A
from the center hinge and remove the hinge. Set aside.
A. Center hinge
⁵⁄₁₆
B. " Hex-head hinge screws
aside.
front of the refrigerator.
hex-head hinge screws attaching the bottom hinge to the
cabinet and remove the hinge from the bottom of the
refrigerator door.
A. Bottom hinge
A
B
A