Remove And Replace Refrigerator Doors - Maytag MFT2778EEZ01 Use & Care Manual

Remove and Replace Refrigerator Doors

NOTE: Measure the width of your door opening to see whether or not you need to remove the refrigerator doors to move the
refrigerator into your home. If door removal is necessary, see the following instructions.
IMPORTANT: If the refrigerator was previously installed and you are moving it out of the home, before you begin, turn the refrigerator
control OFF. Unplug the refrigerator or disconnect power. Remove food and adjustable door or utility bins from doors.
Gather the required tools and read all instructions before removing doors.
TOOLS NEEDED: ³⁄₁₆" hex key wrench and a #2 Phillips screwdriver
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
Style 1 – Water Dispenser
Tubing Connection
A
A. Outer Ring
Wiring Plug
Top Left Hinge
B
C
A. ³⁄₁₆" Internal Hex-Head Screws
B. Ground Wire (Do Not Remove)
C. Do Not Remove Screws
6
Door Removal and Replacement
Style 2 – Water Dispenser
Tubing Connection
A. Outer Ring
A
WARNING
Electrical Shock Hazard
A
Top Right Hinge
A
A. ³⁄₁₆" Internal Hex-Head Screws
B. Hinge Cover Screw
C. Top Hinge Cover
D. Top Hinge
B
C
D