Installing The Processor; Removing The Video-Card Heat Sink - Dell Precision M6800 Owner's Manual

3. Rotate the processor cam lock in a counter-clockwise direction. Remove the processor from the
computer.

Installing the Processor

1. Align the notches on the processor and the socket, and insert the processor into the socket.
2. Rotate the processor cam lock in a clockwise direction.
3. Install the:
a. heat sink
b. processor fan
c. palm rest
d. primary and secondary hard drive
e. optical drive
f. keyboard
g. keyboard trim
h. base cover
i. battery
4. Follow the procedures in After Working Inside Your Computer.

Removing The Video-Card Heat Sink

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. battery
b. base cover
c. keyboard trim
d. keyboard
e. optical drive
f. primary and secondary hard drive
g. palm rest
h. heat-sink fan
i. heatsink
3. Perform the following steps to remove the video-card heat sink:
a. Disconnect the LVDS cable [1].
b. Remove the screws that secure the LVDS cable bracket to the computer. [2]
c. Remove the LVDS cable which was held in place by the bracket. [3]
44