Declaration Of The Manufacturer; Component Names And Functions - NEC AccuSync LCD22WMGX User Manual

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S
POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK • DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any
kind of contact with any part inside this unit.
This symbol alerts the user that important literature
concerning the operation and maintenance of this
unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
Contents
CD-ROM
DVI-D to DVI-D
User's Manual
Audio Cable
Power Cord
15-pin mini D-SUB
to 15-pin mini
D-SUB male

Component Names and Functions

1
2
3
4
5
6
7
01_English
WARNING
Cable
Holder
LCD monitor
(Stand not connected)
Source Switches the input source being displayed.
Auto When not in OSD menu, enables Auto Configuration.
When in OSD menu, act EXIT-key.
-/< When not in OSD menu, lowers the sound volume.
When in OSD menu, decreases value or move left/up cursor.
+/> When not in OSD menu, raises the sound volume.
When in OSD menu, increases value or move right/down cursor.
Menu Opens or Closes the OSD menu.
Power Switch Turns on or off the main power.
Power LED LED Blue - Power is ON.
LED Amber - Monitor is in "Power Saving Mode".
LED is off - Power is OFF.
English-1
1

Declaration of the Manufacturer

We hereby certify that the colour monitors AccuSync LCD22WMGX
(TFT22W90PS)/AccuSync LCD24WMCX (TFT24W90PS) are in
compliance with
Council Directive 73/23/EEC:
– EN 60950-1
Council Directive 89/336/EEC:
– EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
Your new NEC LCD monitor box* should contain the following:
• LCD monitor with tilt base
• Power Cord
• Video Signal Cable (15-pin mini D-SUB to 15-pin mini D-SUB
male)
• Video Signal Cable (DVI-D to DVI-D)
• Audio Cable
• User's Manual
• CD-ROM
• Base Stand
• Cable Holder
* Remember to save your original box and packing material to transport or ship
the monitor.
25/9/07, 12:15 PM
and marked with
NEC Display Solutions, Ltd.
4-13-23, Shibaura,
Minato-Ku
Tokyo 108-0023, Japan