Updating The Tv's Software; Updating The Tv's Software To The Latest Version - Samsung UN49KS8500 E-Manual

Read before connecting an Anynet+ (HDMI-CEC) device
" You can configure the TV's Universal Remote to control third-party cable boxes, Blu-ray players, and home
theaters that do not support HDMI-CEC. For more information, refer to "Controlling External Devices with the
Samsung Smart Control - Using the Universal Remote."
" Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
"
Anynet+ (HDMI-CEC)-enabled devices must be connected to the TV with an HDMI cable. Note that some HDMI
cables may not support Anynet+ (HDMI-CEC).
" The TV remote control may not work under certain circumstances. If this occurs, set up the device as an
Anynet+ (HDMI-CEC)-enabled device again.
" Anynet+ (HDMI-CEC) works only with external devices that support HDMI-CEC and only when those devices are
either in standby mode or turned on.
" Anynet+ (HDMI-CEC) can control up to 12 compliant external devices (up to 3 of the same type) except for
home theaters. Anynet+ (HDMI-CEC) can control only one home theater system.
"
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable and
connect a 5.1 home theater system directly to the external device's digital audio output connector.
" If an external device has been set up for both Anynet+ and a universal remote control, the device can be
controlled only with the universal remote control.

Updating the TV's Software

View your TV's software version and update it if necessary.
Settings Support

Updating the TV's software to the latest version

Settings Support
You can update your TV's software by downloading the update from the Internet directly to your TV or
copying the update from a USB flash drive that contains it to your TV.
" Updating from the Internet requires an active Internet connection.
" To update using a USB flash drive, download the update package from Samsung.com to your computer. Then,
save the update package in the USB device's top-level folder. Otherwise, the TV will not be able to locate the
update package.
[ DO NOT turn off the TV's power until the update is complete. The TV will turn off and on
automatically after completing the software update. All video and audio settings return to their
default settings after a software update.
Software Update
Try Now
Software Update Update now