Connecting To The Samsung Smart Control; Controlling External Devices With The Samsung Smart Control; Using The Universal Remote - Samsung UN49KS8500 E-Manual

Connecting to the Samsung Smart Control

Pair the TV with the Samsung Smart Control.
When you turn on the TV for the first time, the Samsung Smart Control pairs to the TV automatically. If the
Samsung Smart Control does not pair to the TV automatically, point it at the remote control sensor of the
TV, and then press and hold the Return and Start/Pause buttons (labeled ① and ② in the figure below)
simultaneously for 3 seconds or more.

Controlling External Devices with the Samsung Smart Control -

Using the Universal Remote

Control the TV and connected external devices with the Samsung Smart Control.
Source Universal Remote Setup
You can control external devices connected to the TV by using the remote control. To control external
devices, register them by following the instructions on the screen.
" You can also use the
control without any additional setup. For more information, refer to "Using Anynet+ (HDMI-CEC)."
"
Certain external devices connected to the TV may not support the universal remote feature.
" Do not place any obstacles in front of an external device. It may cause signals from the remote control not to
be transmitted properly.
"
The TV memorizes both the external device and its connection port (HDMI 1, HDMI 2, etc.).
Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's remote