Samsung UN49KS8500 E-Manual page 52

Film Mode
●
" This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI (1080i).
Smart LED
●
" This function is not available on certain models in specific geographical areas.
HDMI UHD Color
●
"
When you set the HDMI connection to On, the TV turns off and then on automatically.
" The HDMI connection with
while the HDMI connection with
input signals. For more information, refer to "Supported Resolutions for UHD Input Signals."
" For the SUHD models, each HDMI connection can be individually optimized for
UHD models, make sure to connect to the HDMI IN 1 port of the TV.
" When you connect the TV to an external device that supports only the UHD 24 or 30 Hz frequency or any
FHD frequency, the HDMI UHD Color function may not be available. In this case, set
Off.
HDMI Black Level
●
" This function is only available when the input signal, connected to the TV via an HDMI connector, is set to
RGB444.
Dynamic Contrast
●
Color Tone
●
"
Cool and Standard
" Color Tone is only available when the TV is connected to a computer via an HDMI-to-DVI cable.
White Balance
●
Gamma
●
RGB Only Mode
●
Color Space
●
Reset Picture
●
HDMI UHD Color
HDMI UHD Color
are only available when
set to Off supports up to UHD 50P/60P 4:2:0 input signals,
set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2
Picture Mode is set to Dynamic.
HDMI UHD Color. For the
HDMI UHD Color to