Dhcp Client List; Wireless - TP-Link RE200 User Manual


Note:
To use the DHCP server function of the device, you should configure all computers in the LAN as
"Obtain an IP Address automatically" mode. This function will not take effect until the device
reboots.

4.3.3 DHCP Client List

Selecting Network > DHCP Client List will enable you to view the Client Name, MAC Address,
Assigned IP and Lease Time for each DHCP Client attached to the device.
ID - Here displays the index of the DHCP client.

Client Name - Here displays the name of the DHCP client.

MAC Address - Here displays the MAC address of the DHCP client.

Assigned IP - Here displays the IP address that the Range Extender has allocated to the

DHCP client.
Lease Time - Here displays the time of the DHCP client leased. Before the time is up, DHCP

client will request to renew the lease automatically.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click on the Refresh button.

4.4 Wireless

The Wireless option, improving functionality and performance for wireless network, can help you
make the Range Extender an ideal solution for your wireless network. Here you can create a
wireless local area network just through a few settings. Wireless Settings is used for the
configuration of some basic parameters of the Range Extender.
There are five submenus under the Wireless menu: Connect To Existing Network, Extender
Settings, Advanced Settings, High Speed and Wireless Statistics. Click any of them, and you
will be able to configure the corresponding function. The detailed explanations for each submenu
are provided below.
RE200 AC750 Wi-Fi Range Extender User Guide
15