Network; Lan - TP-Link RE200 User Manual

4.3 Network

The Network option allows you to customize your local network manually by changing the default
settings of the Range Extender. There are three submenus under the DHCP menu: LAN, DHCP
Settings and DHCP Client List. Clicking one of them will enable you to configure the
corresponding function. The detailed explanations for each submenu are provided below.

4.3.1 LAN

Selecting Network > LAN will enable you to configure the IP parameters of Network on this page.
MAC Address - The physical address of the LAN port, as seen from the LAN. The value

cannot be changed.
Type - Several IP types are supported, including: (1) Dynamic IP; (2) Static IP, and they are

explained below.
Dynamic IP - In this type, if your range extender have connected to a router, your client

will dynamically get an IP Address / Gateway from the router, otherwise the client will get
an IP Address / Gateway in the same network as you set below. And this type is
recommended.
Static IP - In this type, you can configure IP Address / Gateway manually.

RE200 AC750 Wi-Fi Range Extender User Guide
12