Pairing Your Device - iHome iBT15 Instruction Manual

Pairing Your Device

Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT15. Once your device is paired,
the iBT15 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it
"discoverable" by turning on Bluetooth mode (check in Options or Settings).
2. Press the
it will enter auto-pairing mode and attempt to connect to a Bluetooth device. Otherwise, follow
step 3 to begin pairing.
3. Press and hold the
The unit will beep twice and the status indicator LED will flash blue, indicating the unit is in pairing
mode.
4. "iHome iBT15" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected" or similar
message appears, select "iHome iBT15" to connect it. If prompted for a passcode, enter "1234" on your
device's keypad.
iHome iBT15
For iPhone
5. Once pairing is successful, a tone will sound and the Bluetooth indicator light will glow solid, indicating the
iBT15 is ready to play music. There should also be an indication on your device. If no device is successfully
paired within 3 minutes the iBT15 will default to previous mode. Once the iBT15 is paired to a device, it will
attempt to autolink when the device is within range (about 30 feet).
Power/End Call Button to turn on the iBT15. The first time the unit is powered on,
Talk/Bluetooth/Play/Pause Button on the right of the unit for 2 seconds.
iHome iBT15
Using the
iHome iBT15
For other
6
iBT15
iHome iBT15