Playing Audio Via Aux In - iHome iBT15 Instruction Manual

Playing Audio via Aux In

1. Connect one end of a 3.5mm audio cable (not
included) to the Aux-in jack on the left side of the
unit and connect the other end to the headphone or
line-out jack on your audio device.
Power/End Call Button on the unit to turn
2. Press the
it on.
3. Power on the audio device and use the controls on
the device to play or pause audio, and navigate
tracks.
4. Press the – or + Button to adjust the system
volume. You can also adjust volume on your device.
5. When done listening, press the
Button to turn the unit OFF. Remember to turn off
your device, too.
NOTE: Make sure no Bluetooth device is playing when
you want to listen to Aux-in or you will hear Bluetooth
instead of Aux-in. Pause the Bluetooth source and Aux-in
audio will be heard in a moment.
Power/End Call
8
Using the
Mobile Phone PC/Tablet Game Devices iPod
iBT15
Laptop MP3/MP4