Osd Warning Messages; Monitor Specifications; Vga Input - Dell SE2416H User Manual

OSD warning messages

When the monitor does not support a resolution, the following message is displayed:
Dell SE2416H
The current input timing is not supported by the monitor display. Please
change your input timing to
listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
The following message is displayed before the DDC/CI function is disabled:
Dell SE2416H
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
When the monitor enters the Power Save Mode, the following message is displayed:
Dell SE2416H
Entering Power Save Mode.
If you press any button other than the power button, one of the following messages
is displayed depending on the selected input:

VGA input

Dell SE2416H
There is no signal coming from your computer. Press any key on the
keyboard or move the mouse to wake it up. If there is no display, press the
monitor button now to select the correct input source on the
On-Screen-Display menu.
1920x1080@60Hz or any other monitor

Monitor specifications

for the Horizontal and Vertical
No
Yes
Operating your monitor
27
|