Audible Alerts - Nokia 3595 User Manual

Existing voice command
After you have associated a voice tag to a command, you can either play back,
change or delete the tag.
PLAY BACK
1 Select Menu > Extras > Voice commands > Audible alerts and the voice
command tag you want to play back.
2 Select Options > Playback.
CHANGE
1 Select Menu > Extras > Voice commands > Audible alerts and the voice
command tag you want to change.
2 Select Options > Change > Start, then speak the voice tag clearly into the
microphone.
DELETE
1 Select Menu > Extras > Voice commands > Audible alerts and the voice
command tag you want to delete.
2 Select Options > Delete > OK.

• AUDIBLE ALERTS

Audible alerts provide you with audible tones to indicate the current signal bar or
battery bar strength of your phone. In order to obtain audible alerts, the alerts must
first be set up as voice commands. To set up voice commands, see "Add a voice tag"
on page 47.
Select and hold Contacts and speak the voice tag clearly into the microphone.
When the phone finds the tag, confirmation appears and the phone plays the
recognized voice tag from the phone memory through the earpiece. The phone
then beeps to indicate how strong the battery or signal strength is. The following
table shows what the number of beeps indicates.
Audible Alert
Battery Bar
Strength
Signal Bar
Strength
One Beep Two Beeps
Low Half full
Weak Somewhat
strong
48
Three Four Beeps
Beeps
Almost full Full
Almost Strong
strong
Copyright © 2004 Nokia