Making N In 1 Copies Or A Poster - Brother DCP-J515W Advanced User's Manual

Chapter 3
Making N in 1 copies or a
poster (Page Layout)
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
IMPORTANT
• Make sure the paper size is set to A4 or
Letter.
• You cannot use the Enlarge/Reduce
and Stack/Sort settings (DCP-J715W)
with the N in 1 and Poster features.
• If you are producing multiple colour
copies, N in 1 copy is not available.
• (P) means Portrait and (L) means
Landscape.
• You can only make one poster copy at a
time.
Note
Watermark Copy, Book Copy,
Ink Save Mode, Stack/Sort and
Enlarge/Reduce are not available with
Page Layout.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose Page Layout.
d
Press d or c to choose Off(1 in 1),
2 in 1 (P), 2 in 1 (L),
4 in 1 (P), 4 in 1 (L) or
Poster(3 x 3).
Press OK.
6
e
If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
3
If you are making a poster the machine
scans the pages and starts printing.
Go to step f.
If you placed the document in the ADF
(DCP-J715W) or are making a poster,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to step f.
f
After the machine scans the page, press
+ (Yes) to scan the next page.
g
Place the next page on the scanner
glass.
Press OK.
Repeat steps f and g for each page of
the layout.
h
After all the pages have been scanned,
press - (No) to finish.
Note
If photo paper has been chosen in the
Paper Type setting for N in 1 copies, the
machine will print the images as if plain
paper had been chosen.