When Using Mac Os - Brother QL-1060N Setup & Operation Manual

2. When using Mac OS

This section explains how to install P-touch Editor 5.0, Fonts, Auto Format Templates,
Clip Art, and the Printer Driver. After installing the Printer Driver, it also explains how to
configure it for the machine.
•
Until the installation of the printer driver is completed, do not connect the machine
to the Macintosh
Network interface cable from the Macintosh
•
When installing the machine, log in as the administrator.
The following is the example for Mac OS
1
Start the Macintosh
The QL-1060N screen is displayed.
If it does not start up automatically, double click the QL-1060N
(CD-ROM) icon.
2
Click the [Mac OS X] folder and double click the [P-touch Editor 5.0
Installer].
Follow the on-screen instructions.
3
After the installation is completed and
the screen shown right is displayed,
click [Done].
The installation of the software is completed.
Next, install the printer driver.
4
Double click [Brother QL-1060N Driver.pkg] in the [Mac OS X] folder.
The Driver Installer starts up. Follow the on-screen instructions.
5
When the installation is completed and
the message "Click Restart to finish
installing the software" is displayed,
click [Restart].
The Macintosh
The installation of the printer driver is completed.
®
®
. If it has been connected, remove the USB interface cable/
®
, and insert the CD-ROM into the CD-ROM drive.
®
is restarted.
®
.
®
X 10.4.9.
17
STEP
1
STEP
2
STEP
3
STEP
4