Chapter 5 Configuration; Configure The Switch Via Gui - TP-Link T2600G-28TS Installation Manual

Gigabit L2 Managed Switch
Chapter 5 Confi guration
5.1 Confi gure the Switch via GUI
18
Configuration
1. To access the GUI of the switch, open a web browser and type the default
management address http://192.168.0.1 in the address field of the browser, then
press the Enter key.
Note: To log on to the GUI of the switch, the IP address of your PC should be set in
the same subnet addresses of the switch. The IP address is 192.168.0.x ("x" is any
number from 2 to 254), Subnet Mask is 255.255.255.0.
2. Enter admin for the default User Name and Password, both in lower case letters.
Then click the Login button or press the Enter key.
3. After a successful login, the main page will appear as the following figure, and you
can configure the function by clicking the setup menu on the left side of the screen.
Figure 5-3 Main Page of the Switch
Figure 5-1 Web Browser
Figure 5-2 Login