Technical Specifications; Main Components; Special Safety Instructions - Power Craft 65400 Instruction Manual

INSTRUCTION MANUAL
Introduction
To get the most out of your new electric chain saw,
please read through this manual and the attached
safety instructions before use. Please also save the
instructions in case you need to refer to them at a
later date.

Technical specifications

Voltage/frequency:
Motor:
Cutting speed:
Blade:
Sound level during use:
Sound pressure during use:
Chain brake, safety switch, Oregon chain and
automatic chain lubrication

Main components

1. Blade
2. Chain
3. Protective shield
4. Front handle
ENGLISH
230 V ~ 50 Hz
2,000 W, 8,000 RPM
800 m/min
405 mm
105 dB
94 dB
5. Safety switch
6. Safety button
7. Rear handle
8. On/off button
9. Blade scabbard
10. Oil gauge
11. Oil filler cap
12. Chain tension screw
13. Grip spikes

Special safety instructions

Switch saw off before activating chain brake.
For outdoor use only. Do not use in rainy or wet
conditions or surroundings.
Not for use for forestry operations, as the power
cable can limit freedom of movement.
Never allow children to use the device.
Ensure there is sufficient chain oil in the tank and
that the chain is well lubricated.
Always wear a helmet, heavy-duty gloves and
protective glasses when using the saw.
Always keep the cable behind the saw during use.
19