Nokia 3606 User Manual page 13

To insert or remove a microSD card, remove the back cover and
battery first.
1. To open the memory card holder,
slide the holder in the direction
shown in the figure (A) and lift it
up (B).
2. To insert the memory card, insert
it into the holder. Make sure that
the contact area on the card is
facing up and towards the slot.
To remove the memory card, pull
it out of the holder.
3. Rotate the memory card holder
back into the slot (A), and slide the
holder back until it firmly snaps
into place (B). To check if memory
card holder has been properly
installed, make sure the two arrows
are directly pointing to each other.
4. Replace the battery and the back cover of the device.
Warning: Do not press down on the memory holder
when the holder is open.
12