Bar Code; Bar-Code Scanner; System Flags; Cumulated Totals (Grandtotals) - ELCOM euro-500t handy User Manual

Introduction

Report

A report is a sales overview of a particular
choice (financial, total, cashier, PLU etc.)
There are two basic types of reports: "X" and
"Z".
"Z" reports print the sales values of the chosen
report. After printing the values, all values are
then reset to zero in the cash register memory.

Bar code

Coding of the numeric description of products
into bars corresponds with clearly defined in-
ternational rules. If a product has an assigned
bar-code, it appears on each of these goods.
The most frequently used code for product
or merchandise denomination in Europe is
the 13-digit code according to the EAN norm
(EAN-13) and the 8-digit code (EAN-8).

Bar-code scanner

Euro 500T/TX Handy
"X" reports print the concrete sales values (ac-
cording to the report chosen) without reset-
ting the data.
A bar-code scanning device is used to improve
speed and accuracy in goods registration.

System flags

System flags are basic settings of the register
that largely influence correctness of cash regis-
ter functions (Number of decimal places, sys-
tem of numbers rounding, date, time, etc.).

Cumulated totals (grandtotals)

Cumulated totals are variables that cumu-
late the values from all sales. There are usu-
ally three known grandtotals: GT1, GT2, and
GT3. Their meaning is as follows:
GT1 - gross turnover - this means the cumu-
lated total of all positive values regis-
tered in the ECR
GT2 - net turnover - the net turnover means
the difference between gross turnover
and negative turnover
GT3 - negative turnover - this means the cu-
mulated total of all negative vlaues
(voidances, refunds, discounts...) regis-
tered in the ECR.
© Elcom, s. r. o.
< Figure 1.2
Relationship betweem
PLU and departments.
<< Figure 1.3
EAN bar-codes.
<< Figure 1.4
Bar-code scanner.
9