Power Nozzle Cover; Power Nozzle Belt And Agitator - Panasonic MC-CL935-00 Service Manual

2.4.

Power Nozzle Cover

2.4.1. Removal
1. Turn Power Nozzle upside down.
2. Unscrew the two (2) Power Nozzle cover screws.
3. Turn Power Nozzle right side up. Press handle release
pedal and lower the swivel. Lift rear latches up.
4. To remove cover, grasp the sides and pull out.
2.4.2. Reinstallation
1. Line up front of cover and base. Rest cover on front edge
of base as shown.
2. Rotate cover back. Press cover firmly until side and rear
tabs snap into place. Turn Power Nozzle upside down
and replace two (2) cover screws.
2.5.

Power Nozzle Belt and Agitator

2.5.1. Removal
1. Remove Power Nozzle cover (see Nozzle Cover -
Removal).
2. Lift agitator assembly out and remove belt.
2.5.2. Reinstallation
1. Install belt over motor drive, then over belt path.
2. Place agitator assembly into power nozzle.
3. Reinstall Power Nozzle cover (see Nozzle Cover -
Replacement).
.
6