Restore Factory Settings; Call Divert - Nokia 2855 User Manual

(for example, *900 to cancel
busy), or press the end key to return to
standby mode.
When you enter a network feature
code successfully the feature becomes
visible in the Network services

Call divert

Call divert tells your network to
redirect incoming calls to another
number. Call divert is a network service
and may not work the same in all
networks, so contact your wireless
provider for availability and
information.
To activate, do the following:
1. In standby mode, select
Settings > Network services
divert and the following:
Divert all calls—Divert all calls to
the number you specify.
2. Select Activate.
3. Enter the number to which your
calls, data, or other information are
diverted, and select OK.
To cancel, in standby mode, select
Menu > Settings > Network services
Call divert > Cancel all call
Cancel all call diverting
your ability to receive voice mail
messages. Contact your wireless
provider for specific details.
Copyright © 2006 Nokia. All rights reserved.
Divert if Call waiting
Call If your wireless provider supports
this feature, call waiting notifies you
of an incoming call even while you are
in a call. You can accept, reject, or
ignore the incoming call.
menu.
To activate, in standby mode, select
Menu
Call waiting
During a call, select
the call key to answer the waiting call.
The first call is put on hold. Press the
end key to end the active call.
To cancel, in standby mode, select
Menu
Call waiting
Menu >
> Call
■ Restore factory
You can reset some of the menu
settings to their original values.
Data that you have entered or
downloaded is not deleted (for
example, entries in your contacts list
are not affected).
1. In standby mode, select
>
diverting.
2. Enter the lock code, and select OK.
may affect
> Settings > Network services
> Activate.
Answer
> Settings > Network services
> Cancel.
settings
Settings > Restore factory sett.
Note: Depending on your
wireless service provider or
network operator, your device
may request the security code
(defaulted to 12345) instead
of the lock code.
S e t t i n g s
>
or press
>
Menu >
63