Change Lock Code; Call Restrictions - Nokia 2855 User Manual

S e t t i n g s

Change lock code

When changing the lock code, avoid
using codes similar to emergency
numbers such as 111 to prevent
accidental dialling of an emergency
number.
If you enter an incorrect lock code five
times in a row, your phone may ask you
for the security code. By default, the
security code is the five-digit number,
12345.
Note: If you enter the wrong
lock code five times in
succession, your phone will
not accept your current lock
code for 5 minutes. This
occurs even if when you
power down the phone
between incorrect attempts.
To change the phone lock code, do the
following:
1. In standby mode, select
Settings > Security.
2. Enter the current lock code, and
select OK.
3. Select Change lock
4. Enter the new lock code (only 4
characters), and select OK.
5. Enter the new lock code again for
verification, and select OK.
When you change your lock code,
make sure to remember it. If necessary,
write it down and store it in a safe
place away from your phone.
60 Copyright © 2006 Nokia. All rights reserved.
Avoid entering a lock code similar to
emergency numbers to prevent
accidental emergency calls.

Call restrictions

Call restrictions
permit numbers for incoming or
outgoing calls.
1. In standby mode, select
2. Enter the lock code, and select OK.
3. Select
4. Select whether to block or allow
Menu >
code.
5. To modify the restriction list, select
allows you to block or
Settings > Security.
Call restrictions
of calls you wish to restrict:
Restrict outgoing calls—Set
restrictions on making calls.
Restrict incoming calls—Set
restrictions on receiving calls.
numbers:
Blocked numbers—Set numbers
that are blocked on incoming calls,
allowing all other numbers. When a
number is blocked, the call is sent
to voice mail.
Allowed numbers—Set numbers
that are allowed, blocking all other
numbers.
from the following options:
Select—Add numbers to the
restriction list.
Menu >
and the type