Allow Multimedia Reception - Nokia 2855 User Manual

M e s s a g i n g
In standby mode, select
Messaging > Multimedia msgs.
Message settings > Scale image
down > Yes or No.
Default slide timing
You can set the default time in mm:ss
for the slides of a multimedia message.
In standby mode, select
Messaging > Multimedia msgs.
Message settings > Default slide
timing, enter a slide time, and select
OK.

Allow multimedia reception

Before you can use the multimedia
message feature, you must specify
whether you want to receive message
at all times or only if you are in the
service provider's home system. This is
a network service. Check with your
service provider for more information.
The default setting of the multimedia
message service is generally on.
The appearance of a multimedia
message may vary depending on the
receiving device.
You can choose to receive all
messages, to block all messages, or to
receive messages only when you are in
the service provider's home network.
In standby mode, select
Messaging > Multimedia msgs.
Message settings > Allow multimedia
recept. and one of the following:
Yes—Allow all incoming messages.
26 Copyright © 2006 Nokia. All rights reserved.
Menu > In home
> messages only if you are in the service
provider's home system. This is a
network service. Check with your
service provider for more information.
No—Block all incoming messages.
Incoming multimedia
messages
Menu >
> You can set how your phone retrieves
incoming multimedia messages.
In standby mode, select
Messaging
Message settings
msgs.
Retrieve—Sets the phone to
automatically retrieve all multimedia
messages. When new messages arrive,
you are notified that a multimedia
message is received. If you choose to
automatically retrieve messages, you
can select
multimedia message or
them in your inbox later.
Retrieve
messages you wish to retrieve.
When new messages arrive, you are
notified that a multimedia message is
available for retrieval. If you select to
manually retrieve messages, select
Show
Menu >
notification, then Retrieve. Select
>
to save the notification to your inbox,
and retrieve the message later.
network—Allow incoming
Menu
> Multimedia msgs.
> Incoming multim.
and one of the following:
Show to read the
Exit
manually—Choose the
to open the message
>
>
to view
Exit