Activate A Voice Command; Work With An Existing Voice Command Tag - Nokia 6590 User Manual

Press Start, then speak after tone appears on the display.
5 Press Start, then speak the voice tag clearly into the microphone.
Note: Do NOT press Quit unless you want to cancel the recording.
The phone replays then saves the recorded tag. The
to commands which have voice tags assigned.

Activate a voice command

After you associate a voice tag with a phone function, you can issue a
command by speaking the voice tag. There are three ways to activate a
voice command:
1 If you have the headset attached, press and hold the headset button.
OR
Press and hold Names.
OR
Press and hold the volume down key.
2 When Please speak now appears, pronounce the voice tag clearly
into the microphone. When the phone finds the tag, Found appears,
and the command is issued.
Note: You cannot use voice commands if you are actively sending
or receiving data using the GPRS connection.

Work with an existing voice command tag

After you have associated a voice tag to a command, you can choose one
of the following options:
• Playback a tag
• Change a tag
• Erase a tag
For detailed instructions, refer to these sections in this chapter.
icon appears next
[ 75 ]
11