Table of Contents
Advertisement
S e t t i n g s
Roaming options
If supported by your wireless service provider, you can select which roaming option
you wish to use. In the standby mode, select Menu > Settings > Network > Roaming
options and one of the following:
Home only—You can make and receive calls in your home area only.
Automatic—The phone automatically searches for service in another digital network.
If one is not found, the phone uses analog service. The roaming rate applies when
not in the home service area.
Mode
If supported by your wireless service provider, you can select whether your phone
will use digital or analog service. In the standby mode, select Menu > Settings >
Network > Mode and one of the following:
Digital preferred—You prefer to make calls on a digital network, but will find another
network, if necessary.
Analog only—You can make and receive calls on an analog network only.
■ Other settings
Voice commands
You can set up to five Voice commands, which allow hands-free operation of
certain phone features.
Add a voice tag
Before using Voice commands, you must first add a voice tag to the phone function.
1. In the standby mode, select Menu > Settings > Other settings > Voice commands.
2. Select a function option you wish to tag, and select Add.
3. Select Start, and speak the voice tag clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The phone replays then saves the recorded tag.
appears next to the function
option for which you add a voice tag.
Activate a voice command
After you have associated a voice command tag with a phone function, you can
issue a command by speaking the voice command tag.
1. In the standby mode, select and hold Names.
2. When Speak now appears, pronounce the voice tag clearly into the microphone.
55
Advertisement
Table of Contents
