Table of Contents
Advertisement
• To answer the call while using the headset
(HDC-3P), press the answer/end button on the
headset cord, or press SEND on the keypad.
Make sure the antenna is fully extended during
the call.
Note: If Keyguard is active, a call can only be answered
by pressing SEND, including when you are using the
headset.
When there is an incoming
call CALL flashes on the dis-
play and the LED indicator
flashes. The phone's ringing
sound (and vibration)
depends on the Profile you're using. See "Selecting
the Profile" on page 18.
You can answer a call any time, even while using
Keyguard, Phone Book or menu functions.
If you don't answer a call, the message 1
MISSED CALL or 'n' MISSED CALLS appears on
the display. Press CLR to clear the display. If you
have subscribed to voicemail, the call will be
transferred to your voice mailbox (see "Message
Waiting (Voicemail)" on page 65).
Or, press OK,
List. The phone automatically stores the caller's
number (if available) in the Missed Calls list (see
"Missed Calls (Menu 2 3)" on page 35). The list
first tells you the number of new numbers in the
list. Wait a few seconds for the most recent num-
ber to appear or press
Calling Line Identification
If you are a subscriber to a network that supports
Calling Line Identification your phone may dis-
play the caller's number or name when the phone
rings. (The name appears only if the name and
number are stored in the Phone Book). For more
or
to view the Missed Calls
to scroll the list.
15
15
15
15
CALL
The Basics
Advertisement
Table of Contents
