Table of Contents
Advertisement
To enter or change calling card information
1 Press MENU then
SETTINGS. Press OK.
2 You'll see CALLING CARD
and the currently selected
card. Press OK to change
it.
3 Use
pointer to None, Card A or Card B, then press
OK. When the phone asks for your security
code, key it in and press OK.
If you select None, the phone briefly displays
NO CARD SELECTED, and no card is selected.
Note: If you've already stored card information, and
then later select None, the active card is deselected.
However, stored card information is left intact.
If you select Card A or Card B, and you've
never entered information for the card before,
skip to Step 5.
4 If you've already entered
information for a Card,
you then have the option
to Select, Edit, or Erase
the card. Use
the pointer to the option you want, and press
OK.
Select chooses this card as the one to use.
The phone briefly displays SELECTED.
Edit allows you to change already-entered
information, described in Steps 5 and 6 below.
Erase erases the stored information. To verify
that you want to do this, press OK at the
ERASE? prompt. Press CLR if you don't want
to erase the stored information.
Menu features
to move the
to move
46
46
46
46
"until you see CALL
Advertisement
Table of Contents
