Table of Contents
Advertisement
• 'Waits' for you to press SEND again. When
you do, the phone sends the numbers 1234.
• 'Waits' for you to press SEND again, then
sends the numbers 3434.
The following example shows storing 'pause'
characters as well as 'wait' characters (Note that
a 'wait' character must still be included, as
shown, to separate the phone number from the
following digits):
18005551212w1234p3434
When you recall this number from the Phone
Book and press SEND, the phone:
• Dials 18005551212 (the phone number), then
• 'Waits' for you to press SEND again. When
you do, the phone sends the numbers 1234.
It then:
• Pauses for 2.5 seconds, then sends the
numbers 3434.
Note: If the keypad tones have been set to Off, the Touch
Tones will still be sent, but you will not hear them.
Pressing MENU SEND sends a displayed number
as a Touch Tone.
To end the call, press END after the phone sends
the Touch Tones and has returned to the normal
call mode.
Using the Flash function
Your cellular system may offer a flash function
service. This system service lets you accept or
make a second call when you already have a call
in progress (e.g. set up a conference call), or send
other information to the network, such as credit
card numbers.
61
61
61 61
Data and Touch Tones
Advertisement
Table of Contents
