Other Operations; Using An Optional Audio Component; Adjusting The Sound - Sony MHC-ECL99BT Operating Instructions Manual

Other Operations

Using an optional audio
component
1
Prepare the sound source.
Connect an optional audio
component to the AUDIO IN jack(s)
on the unit using an audio analog
cord (not supplied).
2
Press VOLUME – repeatedly
until "VOL MIN" appears on
the display.
3
Select the audio in function.
Press AUDIO IN.
4
Start playback.
Start playback of the connected
component and adjust the volume.
Note
The system may enter standby mode
automatically if the volume level of the
connected component is too low. Adjust
the component's volume accordingly. See
"To turn off the automatic standby function"
(page 33).
26
GB

Adjusting the sound

To Press
Adjust the VOLUME +/–.
volume
Generate MEGA BASS.
a more
dynamic
sound
Set the sound EQ +/EQ – repeatedly
effect until desired sound
effect is displayed.