Bosch Intuvia Original Instructions Manual page 22

English–1
Safety Notes
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Save all safety warnings and instructions for future refer-
ence.
The term "battery pack" used in these operating instructions
refers both to standard battery packs (battery packs with
holder on the bike frame) and to rack-type battery packs (bat-
tery packs with holder in the rear rack/carrier).
 Do not open the drive unit yourself. The drive unit is
maintenance-free and may be repaired only through a
qualified repair person and only using original spare
parts. This will ensure that the safety of the drive unit is
maintained. Unauthorised opening of the drive unit will
void any and all warranty claims.
 All components mounted to the drive unit and all other
components of the eBike drive (e.g., the chainwheel,
chainwheel seat, pedals) may be replaced only against
identical components or components specifically ap-
proved for your eBike by the bicycle manufacturer. This
protects the drive unit against overload and damage.
 Remove the battery pack from the eBike before work-
ing on the eBike (e.g., assembling, maintenance, etc.),
transporting it via car or plane, or storing it. Danger of
injury when accidentally actuating the On/Off switch.
 The push-assistance function may only be used when
pushing the eBike. Danger of injury when the wheels of
the eBike do not have ground contact while using the push-
assistance function.
 Use only original Bosch battery packs approved for
your eBike by the manufacturer. Using other battery
packs can lead to injuries and pose a fire hazard. When us-
ing other battery packs, Bosch shall not assume any liabil-
ity and warranty.
 Please observe all national regulations on registering
and using eBikes.
 Please read and observe the safety warnings and in-
structions enclosed in the operating instructions of the
battery pack as well as in the operating instructions of
your eBike.
0 276 001 YYY | (12.10.12)
Drive Unit Cruise/
Drive HMI Intuvia
Product Description and
Specifications
Intended Use
The drive unit is intended exclusively for your eBike and may
not be used for other purposes.
The eBike is intended for use on paved paths. It is not permit-
ted for use in competition.
Product Features
(see page 2–3)
The numbering of the product features refers to the illustra-
tions on the graphics page.
All representations of bike components, with exception of the
drive unit, drive HMI incl. operating unit, speed sensor and
corresponding holders, are schematic and can deviate from
your eBike.
10 Operating unit
11 Display-function button "i" on the operating unit
12 Reduce value/scroll down button " –"
13 Increase value/scroll up button "+"
14 Push-assistance button "WALK"
15 Lock latch for drive HMI
16 Locking screw for drive HMI
17 Speed sensor
18 Spoke magnet of the speed sensor
Indication Elements, Drive HMI
1 Display-function button "i"
2 Illumination button
3 Drive HMI
4 Holder for drive HMI
5 Drive HMI On/Off button
6 "RESET" button
7 USB port
8 Protective cap of USB port
9 Drive unit
a Motor-output indicator
b Assistance-level indicator
c Text indication
d Value indication
e Speed indication
f Battery charge-control indicator
Bosch eBike Systems