Nokia 2160i Owner's Manual page 48

Note: This feature functions only in systems equipped with
Calling Number Identification. Contact your network operator
to see if this is available.
Menu 6 7, Network Feature Setting
Call Forwarding, Call Waiting, and Send Own Number are
services available through your network operator.
When you subscribe to any of these services, your operator
or dealer gives you a separate code that you use to activate
and deactivate each service.
Menu 6 7 lets you store all the codes you use in your
phone. Once you store the code in your phone, the service
appears as a menu item. You can then use the menu to
activate and deactivate
WAITING , and
To remove an item from the menu, go through the steps
shown in "To Store Codes", but simply press left
after the Feature code: prompt (without entering a
(OK)
code).
To store codes:
1) Press left
Network Feature Setting Menu.
2) At
Feature Code:
store in your phone (e.g. 74) then left
3) Press W until you see
WAITING
(OK) to choose the one you want the code to apply to.
With CALL FORWARDING
specific type of
reach your choice then left
4) Press W to reach
5) Press left
CALL FORWARDING
SEND OWN NUMBER
ñ
(Menu)
, or SEND OWN NUMBER
CALL FORWARDING
Activate
ñ
(OK) .
.
6 7. This puts you in the
enter the code you want to
CALL FORWARDING
, you then choose the
ñ
(OK)
or Cancel
42
, CALL
ñ
ñ
(OK)
, CALL
ñ
. Press left
. Press W to
.
.