Touch Tone Settings In The Phone - Nokia 2160i Owner's Manual

creates a "+" (link to another memory location). When
you recall this number sequence from memory and press
í
, the phone dials the phone number, then displays
digits stored in the memory location you have entered.
ñ
Press left
Entering only a "+" at the end of a stored number causes
the phone to prompt you for a memory location after the
call is connected. The phone expects a memory location
after the "+" character. Enter a location number and press
ñ
left (OK)
phone displays the digits stored in that memory location.

Touch Tone Settings in the Phone

Your phone's Touch Tone settings are Menu 4 3, Manual
DTMF Tones, and Menu 4 4, Auto DTMF Length.
Menu 4 3, Manual DTMF Tones
1) Press left
2) Press W to your choice.
3) Press left
This determines the length of the individual Touch Tones
when you press keys during calls. Note that regardless of
this setting, strings of Touch Tones can be sent.
Continuous
hold the key.
regardless of how long you press the key.
tones off, meaning that no tones are sent when you press
individual keys.
Menu 4 4, Auto DTMF Length
ñ
1) Left
2) Press W to your choice.
3) Press left
This determines the length of Touch Tones in strings.
Short sets the DTMF tone length to 100 ms.
the DTMF tone length to 500 ms.
(DTMF) to send them.
. Then press left
ñ
(Menu)
ñ
(OK) .
means the tone sounds for as long as you
sets the tone length to 100 ms,
Fixed
(Menu) 4 4.
ñ
.
(OK)
ñ
(DTMF)
4 3.
28
when the
Off turns the
Long sets