Table of Contents
Advertisement
5) The phone then prompts you for other information,
such as
Enter this information at each prompt and press left
ñ
(OK)
6) You can enter the calling card name by pressing
when the phone prompts you for the access number
or card number. The phone will then prompt you for
the card name. Enter it and press left
To change stored calling card information (such as
your card number), go through these steps, but use
ù
the
key to erase already stored information. Key in
the new information then press left
Menu 3 8, Message Mode
See "Message Mode" on page 16 for a description of this
function.
Menu 4, Phone Settings
Menu 4 1, Lights
With lights on, the keypad lights come on when you press
a key or have an incoming call, and go off 15 seconds
later.
When the phone is connected to a car kit, desktop charger,
or cigarette lighter charger, the keypad lights are on
permanently when this setting is ON; when this setting is
OFF, the lights come on when you press a key or have an
incoming call, and go off 15 seconds later.
Note: You can turn on the lights for 15 seconds by pressing
the power key quickly, regardless of this setting.
Menu 4 2, Keypad Tones
You can select the volume level or turn off the sound the
phone makes when you press a key.
Note: The keypad tone volume is set separately for each
accessory you use.
Access number
.
and
Card number
ñ
34
.
÷
ñ
(OK)
.
(OK)
.
Advertisement
Table of Contents
