Manage Calls; Use Send Own Caller Id; Store The Feature Code - Nokia 1260 User Manual

Manage calls

Call waiting works with both local and long distance calls.
• To answer an incoming call, press
• To switch from one call to another, press
• To end both calls, press

• USE SEND OWN CALLER ID

This feature allows you to block caller ID when you call someone (your
number will not be displayed on their caller ID). This feature is only
effective when calling a number equipped with caller ID.
Note: This feature is available only when supported by the wireless
network and may not function if you are roaming.
Important: This feature works on a call-by-call basis. You must
enable this feature each time you want to block the sending of
your own number to the recipient's caller ID.

STORE THE FEATURE CODE

Before you can use the Send own caller ID call feature, you must store
the feature codes for activating this feature. Once the code is stored in
your phone, it is sent automatically to the network when you select this
option from your phone's menu.
1 Press Menu 4-6-5 (Menu > Settings > Network services > Network
feature setting). The Feature code prompt appears.
2 Enter the feature code issued by your service provider and press OK.
3 Scroll to Send own caller ID, then press Select.
4 Select Yes.
PLACE A CALL WITHOUT SENDING YOUR NUMBER
1 Press Menu 4-6-4 (Menu > Settings > Network services > Send own
caller ID).
2 Scroll to No, then press Select.
3 Enter the desired phone number, then press OK (or press Find to recall
a phone number from the phone book).
Advanced calling features
.
.
.
[ 71 ]