Set Touch Tone Strings - Nokia 1260 User Manual

Erase 1-touch dialing numbers
You can erase 1-touch dialing key assignments at any time.
1 Press Names, scroll to 1-touch dialing and press Select.
2 Scroll to the key you want to erase and press Options.
3 Scroll to Erase and press Select.
4 Press OK to confirm.

• SET TOUCH TONE STRINGS

Your phone allows you to create special sets of numbers known as touch
tone strings which will dial a series of digits after a "wait" or a "pause."
For example, you can program your phone to send your account number
while you are banking by phone.
You must be in the
numbers as usual. When you want to insert the special characters, press
repeatedly to switch among *, +, p, w characters.
Note: Use caution when sending confidential information if voice
privacy is not active.
p Creates a pause when a number is dialed. The numbers you enter
after this special character are automatically sent as touch tones
after a 2.5-second pause.
w Creates a wait when a number is dialed. This means that your phone
waits for you to press
*
Sends command strings to the network. Contact your service provider
for details.
+ Use this character to link a 1-touch dialing number to a number in
the phone book.
Set manual touch tones
1 Press Menu 4-3-2-1 (Menu > Settings > Phone settings > Touch
tones > Manual touch tones).
mode to enter these characters. Enter the
before it sends the number as touch tones.
[ 74 ]