Table of Contents
Advertisement
INSTALLATION
Electrical features:
An anti-disturbance hardware filter is implemented on the External Trigger input
(about 1 millisecond delay).
An additional 15 ms (typical) delay can be implemented through a dedicated software
parameter (refer to WinHost Help On Line).
2.4.5
Outputs
Two general purpose outputs are available. These outputs can only be connected as
open collector configurations. The following pins are present on the 25-pin connector
of the scanner:
Pin
8
11
12, 22
The meaning of the two outputs OUT1 and OUT2 can be defined by the user. Refer
to the WinHost Help On Line.
By default, OUT1 is associated with the No Read event, which activates when the
code signaled by the external trigger is not decoded, and OUT2 is associated with
the Right event, which activates when the code is correctly decoded.
These outputs are both level or pulse configurable.
Maximum voltage:
Maximum current:
Name
OUT1+
OUT2+
OUT REF
DS2400
8/11
OUT1+ / OUT2+
12/22
OUT REF
Figure 24 - Output connections
30 Vdc
25 mA
Function
output 1 +
output 2 +
output reference
USER INTERFACE
Vext 40 Vdc max
2
21
Advertisement
Table of Contents
