To Remove Bottle Complete; To Remove Anode Bar - Panasonic WH-ADC0916G9E8 WH-UX09FE8 Service Manual

18.8 To Remove Bottle Complete

18.9 To Remove Anode Bar

1. Disconnect the connector CN-OLP1 from the
Electronic Controller and detached the lead
wire HT1-L3 (Red) and AC2-L3 (Black).
3. Remove Air Purge Valve.
4. Remove Pressure Relief Valve.
Bottle Complete
5. Remove 2 screws to remove
Bottle Complete.
Anode Bar
1. Remove Anode Bar by
using Socket spanner.
2. Loosen 2 nuts.
150