3-D Tones - Nokia 002F4W8 User Manual

standby mode. Scroll to the profile you want to
activate, and select OK.
Tip: To switch between the general and silent
profiles in the standby mode, press and hold
#.
To modify a profile, scroll to the profile, and select
Options > Personalise. Scroll to the setting you
want to change, and press the scroll key to open the
choices. Tones stored on a compatible memory card
(if inserted) are indicated with
If you want to set a profile to be active a certain
time, select Options
expires, the profile changes back to the previously
active one. When a profile is timed,
in the standby mode. The Offline profile cannot be
timed.
In the tones list, select
service) to open a list of bookmarks. You can select
a bookmark and open a connection to a web page
to download more tones.
If you want the caller's name to be spoken when
your device rings, select
Say caller's name
be found in Contacts.
To create a new profile, select
new.
50
.
> Timed. When the set time
is displayed
Download sounds (network
Options Personalise
>
> On. The caller's name must
Options Create
>

3-D tones

Press , select Tools
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the
ringing tone, select
desired effect.
To modify the effect, select from the following
settings:
Trajectory speed
●
the speed at which sound moves from one
direction to another. This setting is not available
for all ringing tones.
Reverberation — Select the type of echo.
●
Doppler effect — Select
●
tone sound higher when you are closer to your
device, and lower when you are farther away.
>
When you get closer to the device, the ringing
tone seems to become higher, and lower when
you move away from it. This setting is not
available for all ringing tones.
To listen to the ringing tone with the 3-D effect,
select Options Play
>
Utilities 3-D tones.
> >
3-D ringing tone
Sound trajectory and the
— Scroll left or right to adjust
On to have the ringing
tone. If you enable the 3-D