Download Print this page

Nokia 002F4W8 User Manual: Settings; Access Codes

Nokia cell phone user guide.
Hide thumbs


To unmark updates, scroll to them, and press the
scroll key.
To view information on an update, select
To change the settings, select


Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured,
based on your network service provider
information. You may have settings from your
service providers already installed in your device, or
you may receive or request the settings from the
network service providers as a special message.
You can change the general settings in your device,
such as language, standby mode, display, and
keypad lock settings.
See "Settings", p. 161.

Access codes

If you forget any of the access codes, contact your
service provider.
Personal identification number (PIN) code — This
code protects your SIM card against
unauthorised use. The PIN code (4 to 8 digits) is
usually supplied with the SIM card. After three
consecutive incorrect PIN code entries, the code
is blocked, and you need the PUK code to unblock
UPIN code — This code may be supplied with the
USIM card. The USIM card is an enhanced version
of the SIM card and is supported by UMTS mobile
PIN2 code — This code (4 to 8 digits) is supplied
with some SIM cards, and is required to access
some functions in your device.
Lock code (also known as security code) — The
lock code helps you to protect your device
against unauthorised use. You can create and
change the code, and set the device to request
the code. Keep the new code secret and in a safe
place separate from your device. If you forget the
code and your device is locked, your device will
require service and additional charges may
apply. For more information, contact a Nokia Care
point or your device dealer.
Personal unblocking key (PUK) code and PUK2
code — These codes (8 digits) are required to
change a blocked PIN code or PIN2 code,
respectively. If the codes are not supplied with
the SIM card, contact the operator whose SIM
card is in your device.
UPUK code — This code (8 digits) is required to
change a blocked UPIN code. If the code is not
supplied with the USIM card, contact the operator
whose USIM card is in your device.


   Related Manuals for Nokia 002F4W8

This manual also for:


Comments to this Manuals

Symbols: 0
Latest comments: