Wlan Internet Access Points - Nokia 002F4W8 User Manual

WLAN internet access points

Press , and select
Connection Destinations
>
point, and follow the instructions on the screen. Or,
open one of the access point groups, select an
access point marked with
Follow the instructions from your WLAN service
provider.
WLAN network name
●
manually or Search for
an existing network,
WLAN security mode
settings of its access point device.
Network status
●
name is displayed.
WLAN network mode
●
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same
name.
WLAN security mode
●
used: WEP, 802.1x
WPA/WPA2. If you select
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
172
Tools Settings
> >
New access
>
, and select Edit.
— Select Enter
networks. If you select
WLAN network mode
are determined by the
— Define whether the network
— Select Ad-hoc to
WLAN network
— Select the encryption
(not for ad hoc networks), or
Open network, no
To enter the settings for the selected security mode,
select WLAN security
Security settings for WEP
WEP key in use
●
privacy (WEP) key number. You can create up to
four WEP keys. The same settings must be
entered on the WLAN access point device.
Authentication type
●
Shared for the authentication type between
your device and the WLAN access point device.
WEP key settings
●
and
(length of the key),
Hexadecimal), and
in the selected format).
Security settings for 802.1x and WPA/WPA2
WPA/WPA2 — Select the means of
●
authentication:
authentication protocol (EAP) plug-in, or
shared key to use a password. Complete the
appropriate settings:
EAP plug-in settings
●
your service provider instructs.
Pre-shared key
●
same password must be entered on the WLAN
access point device.
WPA2 only mode
●
are allowed to establish a connection in this
mode.
settings.
— Select the wired equivalent
— Select Open or
— Enter WEP encryption
WEP key format (ASCII
WEP key (the WEP key data
EAP to use an extensible
— Enter the settings as
— Enter a password. The
— Only WPA2 enabled devices
or
Pre-