Maintenance - Clearing Blockages - Vax power 7 VCP7P2400 User Manual

Clearing blockages
! !
WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing
! !
maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug from the electrical socket.
Hose blockages
The fl exible hose may be disconnected from the
vacuum cleaner. Carefully remove any blockages found
and reconnect the hose securely.
Removing blockages from the TurboTool
Turn the TurboTool over and slide off
the locking ring.
Removing blockages from the Turbobrush
vax.com.au
Maintenance
Locking ring
Detach lower housing and
remove blockage.
Switch the vacuum cleaner off and
disconnect the power plug from the
electrical outlet.
Lay the Turbobrush on a fl at surface
and turn over to expose the brushbar.
Using a pair of scissors, cut through
any threads or hairs caught around
the brushes and brushbar.
(Keep your Vax as good as new)
Accessory blockages
Remove accessory from the hose/telescopic tube.
Carefully remove the blockage and return to the cleaner.
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing closed.
Slip the locking ring over the neck
of the TurboTool and into the groove
to fi nish.
Tabs
8